Home/Products/Tile Series
ArcticAnchor Tile Series stand and rail assembly
Tile Series stand and rail assembly
Tile Series bracket side profile with rail
Tile Series stand isometric view
Tile Series stand on powder-coated base
Tile Series bracket installed on a shake tile roof

Tile, Slate & Specialty · Low Profile

Tile Series

Snow retention finally built for tile. The Tile Series mounts entirely under the tile on a powder-coated stainless base, then carries a continuous TitanCore™ rail along the eave — no exposed screws, no rows of guards scattered across the roof field.

  • Fits tile, slate, synthetic tile, and specialty profiles
  • Installs under the tile — zero exposed screws
  • 3-screw mount with self-tapping, self-flashing screws
  • Score marks at 2″ and 3″ — align to the course, no measuring
Request a QuoteView Install Guide

↓ Tile install guide (PDF)

Specifications

Technical details

Overall length14″
Shear strength1,600 lb (tested)
Rail spacingUp to 24″ on centre
Installation3-screw mount — self-tapping, self-flashing
BasePowder-coated stainless steel
AlignmentScore marks at 2″ and 3″
WeightTBA
Compatible profilesConcrete, clay, synthetic tile, slate & specialty — full list TBA
Tile Series bracket side profile showing the low-profile rail line
14″Overall length
9.25″Bracket to plate end

Built for tile

What sets the Tile Series apart

A rail-based system designed around the way tile roofs are actually built.

Tile Series stand and rail assembly

A rail system, not scattered guards

Instead of rows of individual guards across the roof field, the Tile Series sets stands up to 24″ apart and runs one continuous rail along the eave — fewer units, faster install, and a far cleaner roofline.

  • Nothing exposed on the surface — all three fasteners land beneath the tile
  • Self-tapping, self-flashing screws seal as they drive
  • Powder-coated stainless base resists corrosion
  • Score marks at 2″ and 3″ align the plate straight off the tile course
Plan your Tile Series layout →

Installation

Install it right the first time

Take the written guide up on the roof, or watch the full walkthrough before you start.

PDF Installation Guide

Step-by-step instructions with diagrams, torque specs, and layout guidance — print it or take it on the roof.

View PDF guide →

Video Walkthrough

A full installation walkthrough on video, for crews who want to see the system installed start to finish.

Coming soon

Compatibility

Fits a range of concrete, clay, synthetic tile, slate and specialty profiles. Exact fit depends on the manufacturer and profile — contact us to confirm before ordering.

Confirm my profile →

Project-specific review may be required. ArcticAnchor™ products are not fall-protection anchors and must not be used as personal tie-off points.

Snow retention for tile and slate roofs

Send us your tile profile and roof dimensions and we'll confirm fit and spec your exact Tile Series layout — free.

Request a Free QuoteBack to Products